Electrical Power Solutions: Interpoint® MFP Series™
Electrical Power Solutions: Interpoint® MFP Series™
MFP Series™ – 3 to 6 Volt Input – 16 Watts
DC-DC Converters
MFP Series is available with Class H SMD numbers, an input range of 3 to 6 volts, up to 16 watts of output power and up to 92% efficiency, typical. Standard and ES screening also available.
No external components required
Side-leaded with a flange option
- Operating temperature -55° to +125°C
- Up to 92% efficiency typical, flat down to 30% load
- Qualified to MIL-PRF-38534 Class H
- see Space Converters for Class K MFP
- Input voltage range 3.0 to 6.0 VDC
- Input transient survivability to 15 Vin for up to 1 sec.
- Inhibit and sync functions
- Current monitoring
- Current sharing pin for parallel operation
- Four pin-selectable, preset voltages:
- 0.8, 1.6, 2.5 and 3.3
- Output voltage continuously adjustable from 0.8 to 3.5 V with resistors
- Indefinite output short circuit protection
- Adjustable start-up sequencing
- Remote sense and voltage margining
- Internal solid state power switch provides many benefits including inrush current limiting
- Case size:
- 1.200 × 1.200 × 0.346 inches max (30.48 × 30.48 × 8.79 mm)
- Flanged: 1.675 × 1.200 × 0.350 inches max. (42.56 × 30.48 × 9.04 mm)
| Model | Nominal Input Voltage | Input Voltage Range | Number of Outputs |
|---|---|---|---|
| Model: MFP0507S | Nominal Input Voltage: 5 | Input Voltage Range: 3.3 to 6.0 | Number of Outputs: 1 |