Electrical Power Solutions: Interpoint® MFW Series

Electrical Power Solutions: Interpoint® MFW Series

  1. Home
  2. Electrical Power Solutions
  3. Electrical Power Solutions: Interpoint® MFW Series™
Product Type: DC-DC Converters
Application: Industrial

The MFW Series DC-DC converters offer up to 70 watts of power from dual or triple outputs. Unscreened models are guaranteed to pass a gross leak test (maximum leak rate of 0.001 atm-cc/sec). Environmentally screened units (designated by the /ES suffix) are hermetically solder sealed.

 

The MFW is not recommended for new designs. For new designs consider the MFL or MOR or contact Applications Engineering.

  • Operating temperature -55°C to + 85°C
  • Input voltage range 19 to 40 VDC
  • Transient protection 50 V for 50 ms
  • Fully isolated
  • Fixed frequency switching
  • Remote sense on single models
  • Inhibit/sync function
  • Indefinite short circuit protection
  • Up to 84% efficiency
  • Case size: 3.20 × 2.46 × 0.595 inches (81.3 × 62.5 × 15.11 mm)
Model Nominal Input Voltage Number of Outputs Output Voltage Total Output Power (W)/Current (A) Auxiliary Output Voltage Typical Efficiency
Model: MFW2812D Nominal Input Voltage: 28 Number of Outputs: 2 Output Voltage: ±12 Total Output Power (W)/Current (A): 70 Auxiliary Output Voltage: Typical Efficiency: 83
Model: MFW2815D Nominal Input Voltage: 28 Number of Outputs: 2 Output Voltage: ±15 Total Output Power (W)/Current (A): 70 Auxiliary Output Voltage: Typical Efficiency: 83
Model: MFW28512T Nominal Input Voltage: 28 Number of Outputs: 3 Output Voltage: 5 Total Output Power (W)/Current (A): 100 Auxiliary Output Voltage: ±12 Typical Efficiency: 84
Model: MFW28515T Nominal Input Voltage: 28 Number of Outputs: 3 Output Voltage: 5 Total Output Power (W)/Current (A): 100 Auxiliary Output Voltage: ±15 Typical Efficiency: 84